Rome - H154

Distance: The distance that the average person is likely to look at. Too far distance will harm the quality of the viewing picture of the opposite appearance, and also affect the decision-making of the level of sunlight exposure. Surrounding environment and situation: The boundary between light and dark of surrounding environment and situation will endanger the behavior subject's requirements for light source. If the peripheral light source is dark, there must be enough light source to light up the actor, and if the ambient light source is bright, it must be raised enough to highlight the actor.

In addition to the surrounding environment of the project , the raw materials of the exterior wall of the building are also one of the elements that endanger the actual effect of lighting. In essence, raw materials with rough surfaces such as concrete, sand and gravel, ceramic tiles, etc., have a good effect after being directly illuminated by the light effect. Raw materials with smooth surfaces such as aluminum profiles, stainless steel plates, and laminated glass will cause total reflection, not only the refraction of light. The actual effect is not significant, and it will also lead to environmental pollution. This situation, especially the reflective laminated glass, is very serious and cannot be ignored. Shiliyangchang, the nightlife culture of modern people, is the highlight of the outdoor lighting project , which is full of prosperous scenery. In the design of outdoor lighting , the manipulation of lighting can generally be divided into three stages, namely time manipulation, three remote manipulation and terminal equipment intelligent control system.

Below I will explain these three lighting controls in detail for everyone: the setting is visual, convenient, and you can choose a manual power switch or an automatic control system. The price is much more cost-effective than other clutch products. Monday, Wednesday, Friday, Thursday, Saturday or working days, several time periods can be set in a fully automatic way to make up the cycle time work. The daily conversion time period can also be set independently. The on/off frequency is set to 10 times per day. The maximum load current achieved by the inductive load load is 25A, and some models and specifications can control 2-3 different loads respectively. Contains LCD digital clock module, its own power consumption is less than 5W. The built-in 1.9V rechargeable battery and the automatic switch of the corresponding battery charging power circuit, even if the power is turned off, it will not harm the timekeeping, and it is not easy to lose the set management program. It is suitable for the natural environment of street lamps. However, the power switch is often damaged due to storm season, fluctuation of working voltage or excessive load.