1.Parameter With solar charging, it is no need for arranging wires. The working life is long and it is no need to replace batteries; it is

suitable for outdoor fence wall lamp and garden fence lamp.

2.The product passed the CE,ROHS,FCC Certification.

3.Good water-proof for all weather usage outside; the concealed wall-mounting design contributes to convenient installation

and fashionable appearance.

Light control function

.Light source:SMD2835*9LED 100LM

.Solar plate:poly-silicon 2V/250mA

.Waterproof:Ip55

.Material:ABS,acrylic

.Charge time:6~8H

.Using time:>8H

.Accumulator:Ni-MH/AA/1.2V*1600mA

Installation and Operation Instructions (attached figure)

LInstall the plastic lamp cover on the lamp body(as figure step 1)

2.Leave the switch to "ON"position,place the solar light under the direct sunlight to be full charged (about 8-12hours)

before you install it for use

3.Take out the expansion particle in the installation package, hit it into the per-drilled hole in the wall ,lock the product in the wall

with screw though the screw holes in the product with a screw driver, if the mounting surface is wooden, the expansion particie

is no necessary.(as figure A & B)

4Inset the mounting bracket into mounting slot in the lamp, and then with racket sharp screw to securely fix the bracket in the

the gutter or fence (as figure C&D)

5After the installation,the product turns into automatically light-operated mode. In the daytime, it turns off and charges

automatically; in the nights, it turns on automatically.

Product Description Details

③Long Mounting Bracket (1 Pc)

⑧LED Lights(9pcs)

② Short Mounting Bracket (1pc)

⑨Battery Compartment

③Mounting Slot (insertion Bracket)

⑩ Solar Panel

④Screw Hole For Flush Mounting

⑪ Solar Lamp Body

⑤Plastic Lamp Cover

@Installation Package:

a:Expansion particle 2pcs

⑥Rechargeable Battery(1pc)

b:Ø3*14mm tapping screws 2pcs

⑦ON-OFF Switch

c:Ø2*6mm tapping screws 1pc

d:Ø5*6mm machine screws 1pc

e:Ø5*25mm racket screws 1pc