Welcome to our store!

Best wishes for you to having a good shopping journey!

Warranty & Service

1.All products could be freely replaced if they are damaged by logistics !
2.Enjoy 10 days to return if any quality problems !
3.Warranty :1-3 years!
4.Delivery time:most item would be shipped within 48 hours!

How to Choose Luminaire :

1.Brightness parameter Lumen.
The brightness of an LED lamp is measured in lumen, not watts.

At present, the Marking watt on the market is not the actual output of the lamp.
For example: solar light mark 1000W, solar panel 30W input, can it balance?As everyone knows,Energy is conserved .How much power does a 1000 watt lamp consume in an hour?How much can a 30-watt solar panel charge in the same amount of time? So,It depens on the actual output of the lights.

For a light source of the same quality, the lamp’s actual output is proportional to the brightness.Different light source, the higher actual output of lamp, the brightness is not necessarily higher, depending on the type and quality of LED.It depends on the lumens produced by a single LED.And the ‘amplifier gain’.
Example：LED A output 0.05W / Pcs, Lumen 80 / Pcs ;LED B 0.06W / Pcs, Lumen 70 / Pcs;If a lamp used the same quantity LED 50 PCs.than ,A lamp’s output is 2.5W ,4000 Lumen ;B lamp’s output is 3W,3500 Lumen .

Sometimes we use the relative wattage of an incandescent lamp,It is the marking watt.But It's just an estimate.

2.Power consumption : Wattage / W . & V
electrical (A)=W / V,solar panel input Larger, V Smaller ,Charge faster ;The Wattage of lamp more higher, the more power it consumes.Solar lamp’s actual output is more smaller, used less power ;It is say more working time.

3.Battery’s capacity:The Larger the better.It is reflected in the length of using time.

4.In short ,LED’s Lumen brightness and actual output of lamp consumption,Less Rated voltage of Lamp ,Less charging time ,long working time ; It is more better.

Remote control can be adjusted:

Remote control can be adjusted:
1.Automatic mode:Charging during the day, automatically lights on in the dark!
2.Remote control turn on the light when you want,(Light remain ;Increase the light ;Reduce the light )
3.Timing. Timing 3H or 5H or 8H: in any state, you can set the working time by pressing the key for 3 or 5 or 8 hours. When the time light is turned off automatically
（Has Memory Function)

Please note that the appearance of the remote control will be changed and its performance will remain unchanged！

Advantage : High lumens, brightness increased by 50%!

This product adopts the design of LED optical lens. The lens can effectively gather the ray of the light source to improve the brightness and reduce the light loss. The light is improved by more than 20 compared to the traditional reflector. At the same time, the PC (Teijin) material is used in the lens of this product which has a transmittance of 92 after processing, which is much higher than 80 of the transmittance. Summing up the advantages, under the same configuration, the overall lighting efficiency of this product is improved by 30-50% compared with competition
(See Annex 3 for details).

Test：

Parameter Specifications:

Emitting Color:white light 5500K-7000K.
Material of light :Aluminum Alloy+glass/Pc
Material of panel : Aluminum Alloy+ iron.
Cable length:5M.
Waterproof level: IP67.
Operating mode: Remote Control +Light Control
Install way: Screws.
Accessories package ：Screws 1 pc+ Remote Controller 1 pc
Charging time:5-8 hours.(Text temperature is measured at 25 degrees.)
Working time:8-16hours.(Full battery）

Item : 100W

Relative Wattage：100W （Relative Brightness of Incandescent Bulb）
LED: ‘2835’ 68 Pcs.
Lumen：80Lux/LED.
Irradiation area：50-80㎡。
Lamp Output ：10W
Solar panel input :6V/12W
Lamps Size：180*155 mm.(allow 10-20mm differences)
Solar panel Size: 35*23 mm.(allow 10-20mm differences)
Battery: 3.7V 6000 mAh ,lithium battery.

Item : 150W

Relative Wattage：150W （Relative Brightness of Incandescent Bulb）

LED: ‘2835’ 106 Pcs.
Lumen：80Lux/LED.
Irradiation area：70-90㎡。
Lamp Output ：15W
Solar panel input :6V/16W
Lamps Size：195*170 mm.(allow 10-20mm differences)
Solar panel Size: 350*290 mm.(allow 10-20mm differences)
Battery: 3.7V 8000 mAh ,lithium battery.

Item 200W

Relative Wattage：200W （Relative Brightness of Incandescent Bulb）
LED: ‘2835’ 196 Pcs.
Lumen：80Lux/LED.
Irradiation area：90-110㎡。
Lamp Output ：20W
Solar panel input :6V/20W
Lamps Size：240*210 mm.(allow 10-20mm differences)
Solar panel Size: 350*350 mm.(allow 10-20mm differences)
Battery: 3.7V 12000 mAh ,lithium battery.

Item : 350W

Relative Wattage：350W （Relative Brightness of Incandescent Bulb）
LED: ‘2835’ 328 Pcs.
Lumen：80Lux/LED.
Irradiation area：120-160㎡。
Lamp Output ：28W
Solar panel input :6V/28W
Lamps Size：280*250 mm.(allow 10-20mm differences)
Solar panel Size: 450*350 mm.(allow 10-20mm differences)
Battery: 3.7V 18000 mAh ,lithium battery.

Notices:

1、For the first time using, please charge the product under the sun for several hours before working.
2、When the light flashes, it means that the power is very low. Please immediately take it to charge, otherwise, the product will stop working soon.
3、The charging performance of solar panel depends on the duration of light and weather conditions. The stronger and longer the sunlight is, the shorter time the charging takes. In cloudy or rainy days, battery performance will reduce, which results to shorter lighting time.
4、Solar panels will be covered with dust because of long-term use in the outdoor. In order to receive better charging performance, please clean it up when necessary.

A2 Professional production of lamps and lanterns ,Wish could provide more light source for the world!